[omqr]

Bro, can i talk to you. I would like to do the samen

 

[omqr]

Hi

So my Unit arrived today - Fitted the main head unit and the reverse camera - but not routed the reverse camera wire correctly yet.

Used the standard Mount from the phone cradle - just the rear part.

I then took the sticky mounting bracket apart and used the part that mounts to the screen with the bolt.

I made up an Aluminium plate - around 25mm x 45mm and used a mirror sticky pad to mount it to the original phone holder.

I did drill and tap a M5 hole to use the original mount screw (had to shorten it and fitted a lock nut also)

Took around 2 hours so far... need to route the wire and tap the reverse light tomorrow.

For the camera - i spent maybe 1 hour (of the 2) trying to fit inside the car - but did not like it - so mounted underneath the overhang above the numberplate.

I took out one of the number plate lights and undid the 4 (5?) Torx screws at top of bumper and fed the wire up through light socket and out top bumper.

Then stuck the camera in position and refitted the light - just fitted - no bumper mods.

Refitted the screws at top.

Need to take out rear light and run the cable tomorrow.

Really pleased

I did fit some sticky feet under the unit - to lift it up on the bracket - to keep it under a little tension so it does not shake when driving.

Also fitted an Automatic Light Switch with seperate sensor (10 minutes)..

View attachment 11983
View attachment 11982
View attachment 11985
View attachment 11984
View attachment 11981

Hi Simon.

Can you help me. I want to do the same